Free Standing Racking
The most oftenly used type of racking in Automated Storage and Retrieval System are: Assembly Beam Type and Bracket Type.
The goods carrier in racking system normally are pallets (steel, wooden or plastic) and cartons/totes. To meet goods storage and retrieval in very high-density, narrow aisle space, the racking system must be manufactured and installed in deadly accurate standard.
Our upright and beam production line all is imported Germany , which able to continuously punching, roll-forming in high precision. For all the project we undertake consulting and designing, we actively carry out Finite Element Analysis and Structure in Extreme Environment Simulation ensure the racking system’s static load stability but also dynamic loading. With almost 30 years history for home and abroad racking project, all of our installation workers are internationalized and experienced.
In all, no matter from theoretical support, manufacturing, installa
Huaruide’s storage and retrieval system for boxes (MiniLoad AS/RS) adopt high dynamic value, high efficiency and energy saving driving technology, provides flexible and fast storage and retrieval for trays, turnover boxes, cases, cartons and bins.
Bellowing 3 basic lines of stacker crane, each with different speeds and equipment on the services required.
With plate extend under load. Available in both single-deep and double-deep configurations.
Extendable side clamps with roller conveyor. Perfect for dynamic storage of varying load sizes.
Dual stacker cranes
Two stacker cranes operate in the same aisle by dispatching system, apply for high-efficiency, multi-stations logistics systems.
U-shaped circuit located at the end of racking. Ideal for high-frequency storage/retrieval and picking operations. Goods are replenished in this picking position
Comparing with in traditional radio shuttle system, single direction shuttle need to interface with forklift frequently, pallet four way shuttle relies on its own structure, achieves double coordinate movement. It provide a efficient, directly access solution from X and Y axis for entire layer goods’ storage and retrieval.
Through more intelligent collaboration between four way shuttle and stacker crane, the full pallets automated handling, storage and retrieval, inventorying, movement are fulfilled. Pallet four way shuttle is widely used in chain stores, e-commerce, medical, tobacco, express since it has better performance in increasing warehousing demand on storage density, space utilization, and intelligence.
1. It has safety and obstacle avoidance design, it will stop and alarming when there’s foreign material or goods fell down from pallet.
2. It is high degree of automation, supporting hand-
It has Vector controlled drive system and accurate positioning, meet for high-frequently input and output requirements;
It has perfect safety refinements and fault diagnosis function;
It transmits information and monitors the entire process;
It can operate with touch screen conveniently, easy for maintenance;
Full loaded speed
Empty loaded speed
Effective working time
Travelling motor power
Lifting motor power
Charging time for 80% electricity at ambient temperature
Charging time for fully charged at ambient temperature
At least 1000times recharge cycles
Huaruide as a logistics equipment manufacturer and system integrator, is pioneer in China for self-engineering and developing storage and retrieval system products. Flexible to design, manufacture, install height up to 40meters, operate in 1.5m wide aisle width with high load capacity.
With the continuous improvement and refinement, today we have wide range of cranes:
Standard configuration of ASRS. One stacker crane with access to racks rows. (One on each side)
Height: 7- 24m
Heavy Duty/Extra High
Height: 24- 35m
Transfer in 2-3 aisles, process 4-6 rows
Extended fork with access to four rack rows (two on each side). Great for high-density storage of low-med throughput.
Equipped with 2 independent forks, one stacker crane with access to two pallet positio
Multishuttle is highly effective for storage, buffering and retrieve totes, cartons, trays or individual bundles. The innovative finger design of the load extractor and telescope arms allow products to be stored single deep, double deep even multi-deep. It is an efficient staging solution that provides precise load sequencing and more operational flexibility at high rates, limited space.
Goods to Person which composed of Multishuttle system, picking station and conveyors is ideal for mixed case pallet building and piece piece pick order fulfillment modules. As a piece picking technology, the goods will be transported to person for picking. GTP system can greatly improve the picking efficiency by transporting goods to person which will cut half of time occupied by walking for person to goods picking. Theoretical picking efficiency of multi-shuttles AS/RS GTP system is 300-1200 orders/person/hour. 5-10times higher than Radio Frequency Picking. Compare to t
In carrier and shuttle system, we’ll put a rail perpendicular to the aisle on each layer, the shuttle goes into the aisle to carry the pallet back to carrier, meantime, it get charged on the carrier. Carrier bring the shuttle with pallet to outbound system like vertical lift or conveyors. Also, the carrier can take the shuttle to different aisles. In carrier&shuttle system, our WMS/WCS control shuttle, carrier, hoist, conveyors to achieve fully automated operation. The system has great performance in improving the high density storage, saving the storage&retrieval time, decreasing labor’s working time and strength.
Performance and Advantages:
Hidden jointing slide-wire power supply and guide rail technology (Invention patent No.: 2013101426242)
Electrical motor from international famous brands
Excellent acceleration performance and operation stability
Global leading automatic lossless charge-discharge technology
Smart no e